Decal Installation Guide
HOW TO APPLY YOUR DECAL
No stress, no bubbles, just a clean install that actually lasts.
WATCH ME DO IT FIRST
Before you jump in, watch this quick video to see how I apply mine step by step. You will feel way more confident going into it.
There are a few different application methods to choose from when applying your decal. My personal favorite is the wet method.
Wet Method:
recommended for large and full coverage window decals. (As seen in video above)
This method is a fan favorite due to how easy it is to get the perfect application with no air bubbles.
- First things first, I always recommend to trace your window with some paper, newspaper or anything else you can find that is similar. This way you will have a perfectly cut template to trace onto the actual decal itself. This makes it so much easier to lay the decal in place and allows for little to no tools needed for application.
- Fill a spray bottle with water + a tiny drop of dish soap.
- Peel the decal and transfer tape away from the backing paper so the sticky side is exposed
- Spray the sticky side of your decal and your window generously with the soapy water solution
- Place the decal on the window and slide it into position.
- Squeegee out all the water. Start from the center and push outward, smoothing out all water and air bubbles. If you do not have a squeegee, use an old credit or gift card.
- Let it dry. At least 30 minutes in the sun, or a few hours in cooler weather.
- Slowly peel off the transfer tape. Once it's dry and stuck, peel back the transfer tape at a sharp angle, going slowly to make sure the decal stays put.